Open and cased hole tools

85-Ton S-2.5 Power units

Bowen S-45 rig power and power unit

A blowout preventer (BOP) Double Gate 9”-11”-13 5/8”

Annular 7”-9”-11”-13 5/8”

Mud Motors -Through tubing - cased hole

All sizes of bit and mills

60.3mm , 73mm, 88.9mm yellow band eue

3 1/8”od - 3 1/2”od- 4 3/4”od

3 3/4- 4 1/2- 5 3/4- 6- 7 3/8- 8 5/8”

A downhole tool routinely used in fishing operations to prepare the top and outside surface of a fish, generally to allow an overshot or similar fishing tool to engage cleanly on the fish.

All sizes flat- sawtooth-wavy bottom

Elevators - air slips - tong parts- drifts- saftey valves- catwalk pipe racks

Rod Elevators , wrenches, transfers, rod back off tools, rod shear , rod cutter.

The plug buster will clean out cement , plugs, packers and other material it will also remove sand, gravel, junk, wood and plastic retainers.

3 1/2”od

Sand Pump Bailer is used to remove the sand and other debris which has settled on top of the sub surface equipment preventing recovery of the equipment by regular wireline operations. It is a pump type tool which operates on a conventional lift pump and piston principle.

3 1/8- 3 3/4- 4 3/4”od

A flange is a projecting rim or collar on a pipe for a pressure vessel. When used in combination with another flange, it is capable of sealing a pressure vessel or another pipe. This is a reliable way of connecting pipe or vessel systems.

Large selection of sizes

Drilling Spools are Pressure-Containing equipment with end connections and outlets, stack in between drill through equipment. Drilling spools are designed to connect the BOP and wellhead, both side outlets of spool can be connected with valves or manifold to prevent blowout.

Ranges 7 1/16- 9”- 11”- 13 5/8”

2 3/8- 2 7/8- 3 1/2”

RS Head

Conventional and fold out pipe rack

MYT- YT- 2 3/8 to 7”

Snubbing is a type of heavy well intervention performed on oil and gas wells. It involves running the BHA on a pipe string using a hydraulic workover rig.